Our planks are designed with joints to replicate random patterns, but planks do need to be cut so that the end joints occur over the center of the studs.
Yes, however, we recommend a nail gun in order to prevent possible damage to the face of our product. Remember to nail flush with the surface of Enkor™ planks in order to achieve optimum holding [...]
If you need to attach the end of a plank and there is no stud to nail to, safely use non-permanent (removable) double-sided mounting tape. Note: The use of construction adhesives or permanent [...]
Yes, but this is not recommended because the large exposed fasteners will likely not be aesthetically pleasing. Follow all other aspects of installation.
Enkor™ wall planks are non-structural. We recommend attaching through the planks into studs to hang shelves or artwork. For proprietary wall hardware, follow the manufacturer's installation [...]