ENKORTM INTERIOR ACCENTS
YOUR QUESTIONS – ANSWERED
Yes, Enkor™ planks are made with real wood that has been engineered to provide a more consistent size and shape to provide easy installation and a cleaner, sleeker look. Our planks are manufactured to feature the texture of wood grain and color variations of reclaimed barn wood, but more user- and family-friendly. The soft backing of our planks is designed to avoid leaving marks on your walls. Our digitally printed wood patterns are sourced from wood reclaimed from real barns, so every Enkor™ accent plank conveys a unique story.
For best results, always clean surfaces immediately. Use a damp, soft cloth or sponge with warm water and mild dish detergent. Do not use abrasive cleaners or sponges. Do not saturate the wood planks. For all detergents and cleaners, be sure to read and follow the product instructions.
Enkor™ wall planks are non-structural. We recommend attaching through the planks into studs to hang shelves or artwork. For proprietary wall hardware, follow the manufacturer's installation instructions and remember that Enkor™ planks add approximately 3/8 inch to the wall thickness.
Yes, but this is not recommended because the large exposed fasteners will likely not be aesthetically pleasing. Follow all other aspects of installation.
If you need to attach the end of a plank and there is no stud to nail to, safely use non-permanent (removable) double-sided mounting tape.
Note: The use of construction adhesives or permanent tapes may result in damage to the drywall if removed at a later date.
Yes, however, we recommend a nail gun in order to prevent possible damage to the face of our product. Remember to nail flush with the surface of Enkor™ planks in order to achieve optimum holding strength, while limiting the risk of snagging clothing on an exposed nail head.
No, this product is not meant for this type of application.
Our planks are designed with joints to replicate random patterns, but planks do need to be cut so that the end joints occur over the center of the studs.
We do not recommend using staples to install Enkor™ interior accent planks.
Yes, but only if your basement is properly finished to eliminate condensation or moisture from the concrete walls and is part of the conditioned living space. Enkor™ planks should not be applied directly to concrete or masonry surfaces.
Nails that are counter sunk, may be concealed using a colored wood putty. It is more difficult to conceal wood screws, however there are decorative screws and screw caps available that can be used as an accent.
Each fireplace, heater, or stove manufacturer has different limitations and allowances for the clearance of combustible materials. Enkor™ Interior Accents is classified as a combustible material and must be installed with proper clearances from heat sources according to the fireplace, heater, or appliance manufacturers installation instructions. Seek advice from a professional if you are unsure for your situation.